6370 Superior Tile Nippers

Superior tile nippers are manufactured from the best quality carbide tungsten steel and are manufactured in the U.S.A.

• Feature sharp carbide tipped cutting edges
• Handle stops with coil spring re-opening action.
• Made for lasting durability, they are the finest quality obtainable, plastic grips are included.
• Length 8 in. (20.32 cm)
• Tile nippers are used to make circular cuts in ceramic tile.
• They can also be used to make straight or angled cuts although you will find it much easier to use a tile cutter or wet saw to make these types of cuts.
• Take small "nips" or "bites" out of it using the tile nippers. Take your time and keep the "bites" small, otherwise you risk breaking the tile and having to start all over again.
• Once the tile is completely cut use a piece of 60 grit sandpaper or a special rubbing stone used by ceramic tile contractors to smooth the finished edge. Especially when the cut will be exposed (e.g. around shower drains) as the edge of the cut tile will be very sharp

• Tungsten carbide jaws.
• Handle stop to protect tips.
• Center spring returns jaws to the open position.