Tile Cutters for Porcelain, Ceramic and Large Format Tile

How to choose a tile cutter

A manual tile cutter does one job better than anything else on the truck: a fast, clean, dust-free break on straight cuts. Score the glaze, snap along the line, set the piece. No water, no slurry, no cord. The right cutter depends on three things: how long your cuts are, what you're cutting, and how often you cut.

1. Match the cutter to your longest cut

Buy a cutter that handles the longest tile you set regularly, plus a little room for diagonal cuts. A cutter that's too short means finishing cuts on a saw, and that's where time goes.

Typical tile	Cutter class	Good fits
Mosaics, subway, 12x12 and smaller	Compact cutters, about 14" to 20"	Superior, QEP, Montolit Minipiuma
12x24, 24x24, most floor porcelain	Pro cutters, about 25" to 40"	Sigma Series 4 NEX, Montolit Masterpiuma P3, Rubi TX MAX
24x48, planks, large format	Long-bed cutters, 40" and up	Rubi TZ, Rubi TK, BIHUI TCP1200, Montolit Masterpiuma Italica
Slabs and panels	Rail cutting systems	See our large format tile tools

2. Match the cutter to the material

Ceramic scores and snaps easily on almost any cutter. Porcelain is denser and less forgiving. It needs a sharp carbide or titanium-coated wheel, one steady scoring pass, and a cutter with enough breaking force to snap it cleanly. Thick porcelain pavers, natural stone and glass are usually better cut on a wet tile saw.

3. Match the cutter to how often you cut

If you tile a few times a year, a Superior or QEP cutter gets the job done for far less money. If you're cutting every day, step up to Rubi, Sigma, Montolit, Cortag or BIHUI. Pro cutters have better bearings, replaceable wheels and frames that stay square after months of jobsite abuse.

The real installer debate: push or pull?

The push camp runs Rubi, Montolit and Sigma's push-style NEX cutters. You score away from your body in one smooth stroke. Push cutters are the norm on most large format work, and many setters find it easier to keep a long score straight that way.

The pull camp swears by Sigma's pull-handle cutters, like the Sigma Technica. You draw the handle toward you, which gives you a lot of feel and control, especially on shorter cuts. Setters who learned on a pull cutter rarely switch.

Where it lands: both make a clean cut when the wheel is sharp and the tile is fully supported. Pick the motion you can repeat all day without thinking about it. If you're not sure, try a friend's cutter before you buy, then match the length to your tile.

Tile cutter or wet saw?

Use a cutter for straight cuts and long rips. It's faster, quieter and makes no mess, so it stays on the job right next to the setter. Use a tile saw for L-cuts, notches, thick stone, glass and anything that needs a polished edge. Most pros run both.

Keep it cutting clean

• Replace the scoring wheel when cuts start chipping or wandering off the line. Wheels are cheap compared with wasted tile. We stock replacements like the Montolit titanium wheel, Sigma 14A wheels and Rubi TX/TZ Plus wheels.
• Keep the rails clean. Wipe off grout dust and mortar so the carriage slides smoothly and the score stays straight.
• Check square on the fence before a big job. A fence that's slightly out of square shows up on every cut.

Frequently asked questions

What size tile cutter do I need? One that's longer than the longest cut you make regularly. For 24x24 tile on the diagonal, that means a cutter in the 36" class or longer.

Can a manual tile cutter cut porcelain? Yes. A pro cutter with a sharp carbide or titanium wheel cuts most porcelain cleanly. Score once with steady pressure, then snap.

Why does my tile break off the line? Usually a worn wheel, scoring twice, or the tile not fully supported on the bed. Replace the wheel first, then make sure the breaker is centered on the score.

How do I use a manual tile cutter? See our step-by-step guide: how to use a manual tile cutter.

Shop every tile cutter above, or browse more tile tools and tile leveling systems. Pro pricing, fast shipping, and a team that sets tile and can help you pick the right cutter for the job.