Details

Laticrete StoneTech Polishing Powder

Features and Benefits
  • Creates smooth, satin finish
  • Eliminates etch marks and light wear patterns
  • Non-acidic
Where to Use
  • Natural stone such as marble, limestone, travertine and terrazzo
Directions for Use
  • Always test in a small inconspicuous area to determine ease of application and desired results
  • Make sure surface is clean, dry and free of waxes and coatings
  • If surface is heavily soiled, pre-clean with StoneTech® Professional KlenzAll™ Cleaner if needed
  • Mask any surfaces not intended to be treated
  • If using StoneTech® Professional Shining Powder following the use of Polishing Powder, ensure that the surface is well rinsed and a new pad is used
  • Apply approximately 1/2 cup Polishing Powder plus 1 cup clean water to stone surface
  • Refinish using a hand orbital sander or weighted floor machine at 130–140 lb, 175 rpm, fitted with a natural hair pad
  • Keep compound wet while refinishing with plenty of water. Add Polishing Powder as needed.
  • Refinish area until desired level of polish is achieved
  • For a highly polished finish follow with Shining Powder
  • Rinse well and use a wet vacuum or hot water extraction unit to remove all remaining compound
Available Sizes and Coverage
  • Polishing Powder: Available in 1.55 lb and 10 lb Containers
  • Coverage: 500-1,000 sq ft per pound

Ratings & Reviews

Be the first to write a review