The part number of the replacement Raimondi Dual-Head Bulldog motor is P297IN86D/110. Please send an email to firstname.lastname@example.org to set up a custom order.
TWO HEADS ARE BETTER THAN ONE!
The Raimondi Bulldog Advanced Bullnose Machine enables you to perform perfect bullnose and 45-degree miter cuts on just about any Porcelain or Natural Stone up to 1-3/16" thick!
- Dual Motor Assembly operating 2 different diamond wheels in one pass!
- For bullnosing and bevelling. Create 1/2 Bullnose, 45° bevel (Jolly) on: marble, granite, porcelain, single and double fired.
- Produce a perfect edge, regardless of the thickness of the tile.
- Eliminating the gauging of each tile before profiling.
- Perform perfect bullnose and 45 degree bevel.
- Fabricate your bullnosing on the job and cut your cost.
- Optional accessories extensions guides shown on some pictures.
- Diamond wheel, not included.
- Wheels available in 3/8" & 5/8" Radius.
- We recommend for Porcelain tile that you only use steps 1-4.
- Provided with telescopic legs with wheels kit.
- Raimondi Dual-Head Bulldog Advanced Bullnose Machine
- 47 in. Sliding Table
- Tool Kit
- Dressing Stone
- Operator's manual
|Raimondi BullDog Dual-Head Advanced Bulldog Machine Specifications|
|Power||Belt Driven 1-1/2 hp / 20 amps|
|Max Length of Bullnose||47-1/4 in|
|Max Depth of Bullnose||1-3/16 in|
|RPM||3360 - motor / 5370 - wheel|
|Wheel Capacity||4-1/2 in-6-1/4 in|
|Dimensionsd||44 in x 31 in x 27 in|