Details

Finishing & Polishing Wheels for the "Bull Dog" Bullnose Machine.
  • Finishing and Polishing wheels turn the Raimondi "Bull Dog" machine into a complete Bullnose polisher.
  • After passing the material through using the Diamond Mill Wheel use these 3 final steps for a perfect polish (Granite may need additional polishing.)
Directions:
  • Step 1 Mill down the stone tile with the Diamond Milling Wheel
  • Step 2 Rough finish the stone tile with the Finishing Wheel
  • Step 3 Polish with the Polishing Wheels (400 to 3500 Grit)
  • NOTE: GRANITE MAY NEED ADDITIONAL POLISHING BETWEEN THE 2nd AND 3rd WHEELS WITH A 200 GRIT DIAMOND PAD.
  • DO NOT SKIP STEPS!!
  • For Porcelain: Step 1 thru 4 of the 3/8" Radius is suggested
  • For Marble: Step 1 thru 4 or 5 (800, 1500 Grits) of the 5/8" is suggested
  • For Granite: Step 1 thru 6 or 7 (1800, 3500 Grits) of the 5/8" is suggested
  • 20mm arbor.
  • 3/8" rounded bevel is used for most Porcelain.
  • 5/8" rounded bevel is used for Natural Stone or thicker Porcelain.


Ratings & Reviews

Be the first to write a review