Laticrete Hydro Ban Pre-sloped Shower Pan

(0) No Reviews yet
Laticrete
$520.91 to $958.74
This item requires a commercial addressFree shipping
$520.91 to $958.74

Product Details

Product Details

Laticrete Hydro Ban Pre-sloped Shower Pan

Constructed of lightweight high-density expanded polystyrene, the Laticrete Hydro Ban Pre-Sloped Shower Pan includes a factory installed drain/waste line connection and is 100% waterproof. This tileable shower pan is easy to install with and is an extreme time saver versus the conventional shower mudpan method.


Features

  • Pre-sloped ready to tile pan eliminates need for traditional mud bed installations
  • Lightweight and durable. Easy to transport and handle during installation
  • Freight shipping required for all 60'' pans to minimize handling
  • Code approved waterproofing meets ANSI A118.10 requirements
  • Factory installed drain assembly
  • Can quickly and easily be modified to size on site
  • Code approved, Meets IAPMO-PS- 46
  • Component of Laticrete Lifetime Warrant - Single source responsibility
  • Works in conjunction with Laticrete tile and stone installation materials
  • Comes with a curb, and one 10oz tube of Hydro Ban Adhesive
  • Only fits the Laticrete Hydro Ban 4" x 4" Grates - Sold separately

Available Sizes

  • 36" x 60" PVC or ABS Center Drain
  • 36" x 48" PVC or ABS Center Drain
  • 48" x 60" PVC or ABS Center Drain
  • 48" x 48" PVC or ABS Center Drain
  • 38" x 66" PVC or ABS Off Center Drain
  • Each unit comes with a curb, and one tube of Hydro Ban Adhesive and Sealant
  • Stainless steel grate is now sold separately

What's Included?

  • Shower Pan with drain (grate sold separately)
  • Curb (5 ft L x 3.75 in H x 3.5 in W)

Custom Size Shower Pans Available

    Order a custom sized shower pan to fit your specific shower size. Simply print & fill out HYDROBAN Pre-Sloped Custom Shower Pan Form with the dimensions of your custom shower and then submit the form via email to orders@contractorsdirect.com. We will send the information to Laticrete and get you the best pricing for your custom shower pan.


    ***All Custom Shower Pans are Non-Returnable - Non-Refundable***

Common Questions

What is a suitable substrate for pre slopped shower pan?

Suitable substrates are Cement Backer Board, Concrete, Exterior Glue Plywood, Oriented Strand Board (OSB)


Should you pre slope a shower pan?

Pre-sloping involves creating a slight slope in the subfloor or the shower base before installing the waterproofing and tile. This slope is designed to direct water towards the shower drain and prevent water from pooling or seeping into areas where it shouldn't, such as the surrounding floor or walls.

Questions & Answers
9 questions

What should I use to "glue" the tile to this product?

You could use any modified or unmodified thinset (Laticrete does recommend using their thinset for warranty purposes).

The 36x48 inch pan with the curb: does the curb add on a couple inches to the overall size? For example, if the area I have for the pan is exactly 36X48, will the curb increase the width of the pan to more than 36 inches?

The curb adds an additional 3" on every size water pan. Example: 36"X48" pan will make the overall demensions to 39"X48".

Can this be used in basement with concrete floor?

Yes, concrete floors are a suitable substrate for the shower pans.

Can two 48 x 48 center drain pans be connected and use extensions at both ends to reach the inside length? Or, what would a custom pan, to the aforementioned dimensions, cost?

If you have two drains in place or the ability to alter the plumbing to accommodate each pan drain, you can install a shower with your described configuration.

You can order a custom pan with the exact dimensions and drain placement. Fill out the custom pan form and submit so we can obtain pricing for you. Lead time is generally 2-4 weeks for custom pans from Laticrete.

I’m doing a 36” x 36” shower stall. Is it best to cut the 36” x 48” prefab pan on-site or is it recommended to have the custom pan made to those dimensions instead?

Either method will work. The Hydro Ban Shower Pans are fully waterproof. You would need to treat the cut edges with Hydro Ban Waterproofing Membrane. You can also create a customer pan here. Custom pans have a 2-3 week lead time and are non-returnable and non-refundable.

View more
Ratings & Reviews

No reviews available

Be the first to Write a Review