|
|
|
|
|
|
|
|
Pramac Pi2800 Inverter Portable Generator
- The Pi2800 is built using tubular steel frames and steel fuel tank to cope with rough situations.
- The 4 wheels carriage makes it easy to transport on any surface.
- Weight 119 lbs.
- 8.6 hours runtime from 2.85 gallon fuel tank
- Recoil starter system with electronic ignition makes for easy starting and reliable, consistent service
- Fully enclosed design for reduced sound output of 58 dB and protection
- Inverter technology reduces the overall size and weight by up to one third in comparison with similar class generators.
- Protected with built-in oil sensor that shuts off the ignition if the oil level drops too low
- Display incorporates voltmeter, frequency meter, hour meter and fuel level.
- Allows operations under an overload conditions up to 120% of the rated output for 20 seconds before output is cut off.
- This allows the starting of demanding loads such as air conditioners & compressors.
- Inverters are ideal for recreational, medical, standby and for powering equipment sensitive to voltage surges (eg. computers) which also gives the cleanest sine wave possible compared to all other generators.
- The sine wave is measured in THD or Total Harmonic Distortion.
- All Pramac products are exceptional in this category but the inverters are half that number to 3% Total Harmonic Distortion.
| Pramac Inverter |
Pi2800 |
| Dry weight |
119 lbs |
| Generator Length x width x height |
21.14" x 18.97" x 22.95" |
| Continuous Watts |
2.5 kW |
| Maximum Watts |
2.8 kW |
| Engine |
Subaru EX170, 4-stroke |
| Displacement |
169cc |
| Fuel capacity |
2.85 US gal |
Horse Power |
4 hp |
Sound level at max.load
(dB(A)at 23 ft) |
58 dB(A) |
| 9463 Pramac Pi2800 Inverter Generator 2,800W |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
