|
|
|
|
BED 55 The FLEX Core Drilling Unit For
Confined Areas
- The slim, stable drill stand, lateral supports
and long feed column are characteristic of
this drilling unit, enabling drilling of the
next higher step from a lower one.
- By rotating the feed column it is also possible to drill in corners and recesses, for example, the steps of stairways, kitchen countertop slabs, parapets, and gravestones.
- Drilling speed can be adapted to any bit diameter (1/2” to 3”) thanks to mechanical 3-speed gearing and VR full-wave electronic control.
- Drill stroke up to 12”
- Water collector, Three vacuum suction cups & side support included.
- Suitable for all drilling applications into natural stone.
- Examples include drilling wall anchor holes in natural stone tiles (to hang light fixtures, bathroom accessories, mirrors or pictures), mounting name plates on natural stone, and drilling small conduits through natural stone for electrical cables.
- Drill Stand is
stable, even for horizontal drilling on all smooth and polished surfaces.
Pick up water even on stairs
- Fasten the water collector with suction cup up to approx. 2” in drilling position, position feed column with drill bit over
the water collector, extract water.
Specifications
- Power 11 AMP, 700 Watts
- Speed under load:
1st gear 350-1,000 RPM
2nd gear 800-2,300 RPM
3rd gear 1,600-4,600 RPM
- Drill bit connection Gas 1/2”
- Diamond drill bit 1/2” to 3”
- Surface area occupied by stand 16” x 5”
- Weight (complete unit) 31 lbs
Advantages At A Glance
- FLEX triple VR electronics: with consistent speed control by tachometer generator, overload protection, and speed selection
- GFCI operator protector circuit breaker: integrated in cord
- Quality shut-off carbon brushes: protects the motor against damage
- Integrated water supply: through the gear head
- Stationary drill stand: with precision column guide, drill stroke up to 12”
- Water collector with suction cup: for collecting water, even on stairs
- Drill bit connection: G 1/2”
- Safety clutch

| 9406 Flex BED55 3 Speed Wet Core Drill with Stand, 11.0 Amps |
|
|
|
|
|
|
|
|