These kits do not include the drum which would be required for a full assembly. ��If all required items are purchased together, factory assembly is available for an additional $75.00.
Drum Not Included With Startup Pack
Carbide flail cutter replacement kits are designed for leveling, grinding, cleaning, grooving, milling, and general surface preparation with the Scarifier/Planer. They are also great for removing pavement markings, epoxy, paint, and waterproofing membranes. Our premium quality tungsten carbide flail cutters last up to 30 times longer and remove up to 5 times faster than traditional steel scarifier cutters.
- Carbide cutters are long lasting used for fast milling of concrete, asphalt or coatings.
- CP408-TV Carbide Heavy Duty Cutters are for heavy removal of concrete, asphalt or coatings.
- Pointed steel cutters are used to lightly scarify, clean surfaces, remove traffic lines or remove coatings.
|CPM-8 Pak 1|
215 Spacers, 6 Shafts
|CPM-8 Pak 2|
175 Spacers, 6 Shafts
|CPM-8 Fine Setup|
174 Spacers, 6 Shafts
|CPM-10, 6 Shaft Pak|
252 Spacers, 6 Shafts
|CPM-10, 8 Shaft Pak|
384 Spacers, 8 Shafts
|CPU10FC, 4 Shaft Pak|
130 Spacers, 4 Shafts, 8 Bushings
|CPU10FC, 6 Shaft Pak|
240 Spacers, 6 Shafts, 12 Bushings
300 Spacers, 6 Shafts, 12 Bushings
Question & Answers
Although these cutters last much longer than traditional steel scarifier cutters, Edco cannot provide an exact life expectancy; usage can vary greatly based on the material being cut, the rate at which you are cutting, and other confounding variables.