DTA Universal Lippage Leveling System

Cap and Spacer system eliminates lippage in large tile installation.

  • Very easy to learn and use at any skill level.
  • Increase the speed of installation.
  • Gun Tensions cap and spacer together.
  • Gun can be used for walls and floors.
  • 1/16" (1.5mm) grout joint.
  • Reusable Caps 3-5/32" (80mm long).
  • Universal lippage spacer dimensions: 4-1/4" (108mm) High x 7/16" (11mm) Wide.
  • Can be used with other lippage system on the market.
Spacers Features:
  • Serrated on both sides
  • Longer spacers (pavers)
  • Curved base to tension diferent tile thickness.
  • No soaking required.
  • Ideals for floors and walls.
How to use Lippage System
  • Place Lippage Spacer between tiles 4" from both ends of tile.
  • Once tile and spacer are in place, fasten the Lippage Cap. There is a cap release lever to allow the cap to be removed if necessary.
  • Clamp the two pieces together leveling the tiles, Using the Leveling Gun, This will hold the tiles in place while the tile adhesive sets.
  • Once tile adhesive has dried, simply kick the Cap along the grout joint to remove. Use white rubber mallet to remove from walls. Grout to finish tiled area.
  • Remove Cap from Spacer for re-use.

  • Tool is specific to this system only can not be used on other similar

Ratings & Reviews

Be the first to write a review