85 Products

View by:

85 Products

9568 Hawk Brute Horseshoe Weight

$55.55 to $146.99
  • 25 lbs each.
  • Can add up to 3 weight for total on-floor weight of 200 lbs.
  • Weight post included with weights when ordered with machine.
  • Add to cart

    9545 Pearl Hawk Buffer Accessories

    $39.60 to $177.15
  • 3 Gals. solution tank.
  • Weight post.
  • 10 lbs. weight.
  • Buff Vac, installs in minutes, no special tools needed.
  • Add A Wheel buffer attachment, stabilizes the buffer.
  • Add to cart

    AT0500R 500 Grit 3" Advantage Resin Discs for Marble

    $45.28
  • Better than other polishing systems for marble or terrazzo for better than factory finishes.
  • Specifically for marble and terrazzo floor restoration or maintenance.
  • Used under a variety of floor machines.
  • AT0300R 300 Grit 3" Advantage Resin Discs for Marble

    $45.28
  • Better than other polishing systems for marble or terrazzo for better than factory finishes.
  • Specifically for marble and terrazzo floor restoration or maintenance.
  • Used under a variety of floor machines.
  • 53904 Edco Contrx Polishing Kit

    $1,828.75
  • Polishing Kit includes 6 each of 400, 800, 1800, 3500, Buffing grit V-Har Felt polishing pads
  • 53903 Edco Contrx Honing Kit

    $1,409.96
  • Honing Kit includes 6 each of 50, 100, 200 grit resin bond discs & 4" QC velcro pad adapter.
  • 53902 Edco Contrx Preparation Kit

    $1,540.00
  • Prep Kit includes 6 each of 30, 70, 120 grit medium grinding dots & magnetic QC holder.
  • 6783 Husqvarna TDGH Diamond Grinding Heads

    $322.50 to $907.49
  • For smoothing rough or patched floors and feathering uneven joints or slab panels; removing hard epoxies, urethane and other coatings or toppings; and grinding down bumps, raised or curled sidewalk panels.
  • Add to cart

    7978 Edco Silabide Pad & Driver

    $40.65 to $113.20
  • Nylon mesh pad that has been inlaid with silver carbide grit.
  • Ideal for wet or dry scrubbing of concrete, stone, metal, brick, wood and/or tile surfaces.
  • Acid etching.
  • Add to cart

    7975 Edco Grinding Stone

    $6.42
  • Accessories for the Edco Surface Grinders.
  • Stones are available in Super Coarse, Coarse, Medium, Fine, and Super Fine.
  • Add to cart

    7973 Edco Strip Serts

    $91.77 to $106.66
  • Assembly includes Strip Sert Case and 4-sided Carbide Chip. Sold individually requires 3 per head
  • Replacement pack includes 6 4-sided carbide chips, screws, washers & allen wrench.
  • Add to cart

    7971 Edco Dyma-Serts for Terrazzo

    $155.40 to $156.43
  • Available in 50, 80, 120, and 240 Grits.
  • Long lasting- up to 30,000 sq feet (2,800 sq meters) of grinding action.
  • Add to cart

    7970 Edco Dyma-Serts For Concrete

    $149.22
  • Sold individually requires 3 per head.Holding case & wood wedges sold separately.
  • Long lasting- up to 30,000 sq feet (2,800 sq meters) of grinding action.
  • Add to cart

    7892 Diamant Boart 5" Wet Concrete Polishing Pads

    $17.99
  • 5" Premium diamonds impregnated pads.
  • For wet use only
  • Great for Concrete, Granite, Hard Marble & Porcelain.
  • Add to cart

    7873 Edco TMC-7 Turbo Grinder Accessories

    $128.63 to $360.18
  • 7" Diamond Cup Wheels can be used with the rigid head TG-7 or the flexible head TMC-7.
  • Scarifier Assembly Discs can only be used the rigid head assembly TG-7.
  • Add to cart

    7776 Pearl 15" Hexplate With Clutch Only

    $609.64
  • Super clutch will disengage if the Hexpin plate hits an obstruction.
  • Super clutch is self resetting, simply turn off buffer and restart, less downtime.
  • Safely prevents coupler breakage and buffer damage.
  • 7775 Pearl Carbide Hexpin Attachment

    $14.49 to $40.64
  • Replaceable four sided, abrasion resistant, carbide insert.
  • For scraping and removal of a variety of coatings and paints from concrete surfaces.
  • Add to cart

    7774 Pearl Hexplate Diamond Segmented Pads Attachment

    $6.04 to $151.10
  • Faster and more aggressive, hex pin diamond segmented pad attachment.
  • Can be used dry or wet on concrete surfaces 
  • Ideal for removing paint & epoxy, & repairing, leveling, and grinding concrete.
  • Add to cart

    AT1000R 1000 Grit 3" Advantage Resin Discs for Marble

    $45.28
  • Better than other polishing systems for marble or terrazzo for better than factory finishes.
  • Specifically for marble and terrazzo floor restoration or maintenance.
  • Used under a variety of floor machines.
  • 7377 MK-1020 20 Segments 10" Diamond Grinding Head

    $240.00
  • Designed to give rough concrete surfaces the smoothest finish in the quickest time.
  • 10" Diameter, 4 bolts mount.
  • Add to cart

    7376 MK-1010 10 Segment 10" Diamond Grinding Head

    $180.00 to $185.00
  • Designed to give rough concrete surfaces the smoothest finish in the quickest time.
  • 10" Diameter, 4 bolts mount.
  • Add to cart

    58133 Raimondi 36 Grit Double Sided Carbide Disc

    $150.00
  • 18" diameter Fine for paint, sealers grinding.
  • Sanding, light surface preparation.
  • Also for removal of grout residue when removing old floors.
  • A0006 Hawk 17" Nylon Brush

    $126.00
  • Outlast floor pads 100 to 1, they are more efficient than floor pads.
  • Irregular bristle length for optimal cleaning on uneven surfaces.
  • HEX17CBD4CLT 15" Hexplate With Very Aggressive Carbide Hexpin Chip, Assembly Complete

    $1,079.09
  • Very Aggressive Chip #4 Carbide Hexpin Attachment Kit.
  • Super clutch will disengage if the Hexpin plate hits an obstruction to prevent coupler breakage and buffer damage.
  • Super clutch is self-resetting.