Edco Surface Grinders & Polishers

View by:

Edco Surface Grinders & Polishers

7970 Edco Dyma-Serts For Concrete

$158.31
  • Sold individually requires 3 per head.Holding case & wood wedges sold separately.
  • Long lasting- up to 30,000 sq feet (2,800 sq meters) of grinding action.
  • Add to cart

    A151 Edco DYMA-Slider Tool Box Kit for 2EC/2GC-NG, 2DP (Hard)

    $1,599.90
  • 18 Grit Dyma-Segs (6), 30 grit Dyma-Dots (6), 30 grit Dyma-Arrows Left (3), 30 Grit Dyma-Arrows Right (3), PCD w/ Backing Left (3), PCD w/ Backing Right (3).
  • Ideal for the removal of Hard Tacky Surfaces, Epoxy
  • 9713 Edco Quick Change Diamond Dots

    $37.12 to $65.50
  • Single or double diamond dots.
  • Available in grit sizes 30, 70 and 120.
  • For soft, medium and hard concrete.
  • Fits Edco 7" or 10" Turbo grinders.
  • Add to cart

    7874 Edco 10" Magna-Trap Turbo Grinder

    $4,135.08 to $6,517.86
  • Grind, repair and smooth rough surfaces and concrete slabs.
  • One of the best tools for removing epoxy or urethane thin-coats, thin-set and mastics, and industrial or paint build-ups.
  • Add to cart

    9726 Edco Magna-Trap Dual Disc Floor Grinder

    $4,203.15 to $5,145.84
  • New redesigned EDCO Magna-Trap concrete floor grinders!
  • Smooth rough surfaces, repair damaged concrete slabs.
  • Remove urethane or epoxy thin-coats, mastics and thin-set, industrial or paint build-ups
  • Add to cart

    58100 Edco 2D-HDE, 5 HP, 230 Volt Heavy Duty Floor Grinder/Polisher

    $7,959.00
  • 22″ Working Width grinds approximately 500 sq. ft. per hour at 1/32″, 1/16″ per pass with Magna-Trap™ Dyma-Dots.
  • GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap Slide-On Tooling.
  • 7872 Edco TMC-7 Turbo Max Combo 7" Floor Grinder

    $2,750.03 to $3,061.60
  • Electric model has a Flexible Head.
  • Gas model has a Rigid Head.
  • Smooth rough surfaces and repair damaged concrete slabs.
  • Remove urethane or epoxy thin-coats, mastics and thin-set, industrial or paint build-ups.
  • Add to cart

    58900 Edco TL-9 1.5HP 110V Turbo-Lite Direct Drive Grinder

    $2,650.00
  • Resurfacing hundreds of sq ft. per hour.
  • Removing hard coatings.
  • Working in compact areas.
  • Some Edge Grinding applications.
  • 59800 Edco Wedgeless Single-Disc Grinder (SEC-NG) 1.5HP-115V

    $3,253.25
  • 11″ working width will grind approximately 200-250 sq.ft. per hour at 1/32″ with EDCO Magna-Trap Dyma-Dots.
  • GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap Slide-On Tooling.
  • 7973 Edco Strip Serts

    $97.36 to $113.16
  • Assembly includes Strip Sert Case and 4-sided Carbide Chip. Sold individually requires 3 per head
  • Replacement pack includes an allen wrench and 6 of the following: 4-sided carbide chips, screws, & washers. 
  • Add to cart

    98400 Edco 20" Automatic ProScrubber APS-20

    $4,999.90
  • Squeegee width 30” with 65 lb of scrubbing pressure.
  • Cleans 16,000 Sq. Ft. per Hour.
  • Ideal for cleaning grout tile lines typical of those found in shopping malls.
  • 53904 Edco Contrx Polishing Kit

    $1,473.78
  • Polishing Kit includes 6 each of 400, 800, 1800, 3500, Buffing grit V-Har Felt polishing pads
  • 6786 Edco A111 Tool Box Startup (6 DymaSerts (1X), 6 Cases, 9 Wedges, Tool Box, Punch, Hammer)

    $1,124.01
  • A111 Tool Box Startup, General Concrete, includes 6 DymaSerts (1X), 6 Cases, 9 Wedges, Tool Box, Punch, & Hammer
  • 7975 Edco Grinding Stone

    $6.81
  • Accessories for the Edco Surface Grinders.
  • Stones are available in Super Coarse, Coarse, Medium, Fine, and Super Fine.
  • Add to cart

    72034 Edco 7" Quick Change Multi-Accessory Disc

    $249.00
  • Quick-change multi disc accessory for Magna trap tooling.
  • A161 EDCO Sliders Tool Box Kit for TG-10 (Hard)

    $1,595.20
  • Includes: 18 Grit Dyma-Segs (6), 30 grit Dyma-Dots (6), 30 grit, Dyma-Arrows Left (6), PCD w/ Backing Left (6).
  • Ideal for aggressively Grinding Concrete and Removing Thick Epoxies, Weather-Proofing Membrane and Other Coverings.
  • A160 EDCO Sliders Tool Box Kit for TG-10 (Medium)

    $1,595.20
  • Includes: 18 Grit Dyma-Segs (6), 30 grit Dyma-Dots (6), 30 grit, Dyma-Arrows Left (6), PCD w/ Backing Left (6).
  • Ideal for aggressively Grinding Concrete and Removing Thick Epoxies, Weather-Proofing Membrane and Other Coverings.
  • 7971 Edco Dyma-Serts for Terrazzo

    $164.86 to $165.96
  • Available in 50, 80, 120, and 240 Grits.
  • Long lasting- up to 30,000 sq feet (2,800 sq meters) of grinding action.
  • Add to cart

    A136 Edco SEC-NG Strip-sert Tool Box Kit

    $369.50
  • (3 StripSerts w/Carbides, Tool Box, Punch, Hammer).
  • Best for removing mastics, paint build-ups, resins, tar, fiberglass, ice and industrial build-ups.
  • A152 Edco DYMA-Slider Tool Box Kit (Medium)

    $804.50
  • 18 Grit Dyma-Segs (3), 30 Grit Dyma-Dots (3), 30 Grit Dyma-Arrows Left (3), PCD w/Backing Left (3).
  • A153 Edco DYMA-Slider Tool Box Kit (Hard)

    $804.50
  • 18 Grit Dyma-Segs (3), 30 Grit Dyma-Dots (3), 30 Grit Dyma-Arrows Left (3), PCD w/Backing Left (3).
  • A150 Edco DYMA-Slider Tool Box Kit for 2EC/2GC-NG, 2DP (Medium)

    $1,599.90
  • 18 Grit Dyma-Segs (6), 30 grit Dyma-Dots (6), 30 grit Dyma-Arrows Left (3), 30 Grit Dyma-Arrows Right (3), PCD w/ Backing Left (3), PCD w/ Backing Right (3).
  • Ideal for the removal of Hard Tacky Surfaces, Urethane Epoxy, Multi-Part Epoxy, Water-Proofing Membrane, Pool Deck Coating, Thick Mastics, Old and New Epoxy Coatings.
  • A134 Edco SEC-NG PCDyma-sert Tool Box Kit

    $589.50
  • 3 PCDymaSerts, 3 Cases, Tool Box, Punch, Hammer.
  • Ideal for the removal of Hard Tacky Surfaces, Urethane Epoxy, Multi-Part Epoxy, Water-Proofing Membrane, Pool Deck Coating, Thick Mastics, Old and New Epoxy Coatings.
  • 6787 Edco A112 Tool Box Startup (6 DymaSerts (2X), 6 Cases, 9 Wedges, Tool Box, Punch, Hammer)

    $1,124.01
  • A112 Tool Box Startup includes 6 Abrasive Concrete DymaSerts (2X), 6 Cases, 9 Wedges, Tool Box, Punch, & Hammer