26 Products

View by:

26 Products

1106098 Imer Step-UP 120 Spray & Grout Pump

$16,500.00
  • Comes with a built in mixer, compressor, hoses & gun.
  • Twice the flow and 1-1/2 times the PSI than the Small 50.
  • 220 Volt single phase motor runs on 16 Amps circuit.
  • Free shipping from IMER factory warehouse
  • 1106045 Imer Small 50 Pumping & Spraying Machines

    $5,699.00
  • Spray or pump up to 3.5 gls. of material per minute.
  • Spray fire proofing, pump grout into door jambs, fill molds at precast plan, spray stucco onto residential homes, happy grout to finish rock walls.
  • 1106048 Imer KOINE 35, 220V, 1 phase.

    $14,999.00
  • Continuous mixing, spraying and pumping of pre-blended cementitious and gypsum based mortars, stucco, fireproofing, self-leveling underlayments and grouts.
  • 5220210101 Imer Carry 107TT Ride On Track Buggy

    $12,499.00
  • 8 HP Honda GX engine with full hydraulic controls.
  • The dumper comes complete with a loading shovel to scoop up materials and load itself.
  • Free ground shipping
  • 1107546 Imer IM250 Small 50 Compressor

    $1,799.00
  • Diaphragm compressor is needed to allow for spraying of materials.
  • Compressor delivers high volume output with low pressure.
  • Includes 2 pcs 53 ft of air hose Ø 1/2" with couplings.
  • 1107548 Imer Small 50 Optional Vibrating Screen

    $749.00
  • Used to screen loose materials which may contain rocks, stones and debris larger than 5/16".
  • Plugs into the outlet for this vibrator and control from the panel.
  • 1107015 Imer Small 50 Optional Vibrating Hopper

    $999.00
  • Use for controlled pressure grout injection with pressure regulator and tuck-pointing and grouting.
  • 1107515 Imer Small 50 Injection Pressure Meter Unit

    $1,190.00
  • Injection control relay switch maintains consistent pressure to ensure material works its way through the void being filled.
  • 1107540 Imer Mortar and Fireproofing Spray Gun Kit

    $749.00
  • Traditional mortar and fireproofing spray gun kit.
  • Includes 11/16" & 9/16" deflectors, 2 pcs 50 ft. hose 1" with cam couplings, Case with 1 nozzle cleaner, & 1 sponge 1-3/16".
  • Note: Compressor needed for this kit.
  • 1107504 Imer Tuck Point Gun Kit

    $599.00
  • Durable with a high thrust ratio for easy efficient dispensing.
  • Tuck Point Gun with Remote Control Power Cord.
  • 3/4” Industrial Material Hose Fitting, for 3/4” Industrial Material Hose.
  • 1107505 Imer Spacing Gun With Air Injection

    $564.21
  • Use with Small 50 or Step 120 Pump.
  • 1107010 Imer Light Materials Spray Gun Kit

    $749.00
  • Used for spraying of thinner coats such as acrylic stucco and coatings.
  • Makes a great tool for pointing, filling in cracks and joints in between stone walls.
  • Note: Compressor needed for this kit.
  • 1107009 Imer Small 50 Painting kit

    $680.00
  • Spray eleastomeric coating (1/8" or less build up).
  • Note: Compressor needed for this kit.
  • 1107549 Imer 5 ft. Overhead Wand w/ Tips

    $399.00
  • 5 ft. length allows spraying overhead or into hard to reach spaces, includes a tip.
  • 1107525 50 ft. of 1" Hose Cam Couplings

    $299.00
  • Cam couplings, 1" air Hose, 50 ft.
  • 1107526 Imer 33 ft. of 1" Hose Cam Couplings

    $219.00
  • Cam couplings, 1" air Hose, 33 ft.
  • 1107570 Pipe Hook Imer Small 50 Pump

    $109.00
  • Allows the pump hose to be hung in place while hollow cavities are filled with material.
  • 1107193 Imer Victaulic 3-¼" Coupling

    $120.00
  • Suitable for connecting to Victaulic single groove coupler.
  • 1107179 Imer Victaulic 4" Coupling

    $145.00
  • Suitable for connecting to Victaulic single groove coupler.
  • 1107030 Imer Stator Rotor for small 50 (Green)

    $149.00
  • Stator D 8-1,5 ECO, Max. grain size 5 mm.
  • Flow rate 52 l/min.
  • Working pressure 15 bar.
  • 1107011 Imer Spray Gun for Spacing, smoothing, Painting & Injections

    $204.90
  • Spray gun for spacing, smoothing, painting and injections without deflectors.
  • 1107031 Imer Stator Screw D 8-1,5 ECO, (Green)

    $159.00
  • Stator Screw D 8-1,5 ECO, Max. grain size 5 mm.
  • Flow rate 52 l/min.
  • Working pressure 15 bar.