|
|
|
|
|
|
|
|
Husqvarna DM330 Low Speed Motor DrillExtremely easy to operate. The DM 330 features an ergonomic handle that makes it easy to carry around. The controls are designed and positioned to further enhance ergonomics and to facilitate drilling. The DM 330 can be used on all of Husqvarna’s larger drill stands, and for drill bits up to 14" in diameter. The machine has three gear stages, so you can find the optimal drilling speed.
- Spindle speed full load low speed 240 / 540 / 930 Rpm.
- 20 Amps, 110 Volts, 2,300 Watts
- 1-1/4" - 7 spindle thread.
- Recommended bit diameter from 14" (350mm).
- Weight 29 lbs (13 kg).
Applications.
- Core drilling up to 14" in diameter with Husqvarna drill
stands.
- For reinforced concrete, bricks and other building
material.
- Heavy-duty applications like water evacuation, channels
for ventilation and plumbing, waste evacuation pipes,
gas supply pipes, barriers, road signs and holes in corners
for wall sawing openings.
- Angle drilling and positioning in all directions.
- Ideal for use with DS 450 and Gyro 50 drill stands.
Benefits.
- The LED indicator shows the load of the machine and
makes it possible for the operator to always drill at
maximum pressure for best performance.
- Equipped with Elgard™ which indicates via the LED,
when the machine is overloaded to prevent motor
damage and increases product life.
- For a smooth start and when drilling in hard materials
such as re-bar, the drill motor is equipped with Softstart™
and Smartstart™.
- The machine has an integrated handle for easier transport
and faster set-up.
- The controls are designed and positioned to further
enhance ergonomics and are easy to maneuver.
- The water hose has 180 degree freedom providing flexible set-up configuration.
| 5284 Husqvarna DM330 Low Speed Motor Drill |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
