Husqvarna Core Drilling Equipment

View by:

Husqvarna Core Drilling Equipment

965173601 Husqvarna DMS 240 Core Drill Rig

$1,595.00
  • The stand can be tilted from 0 to 45 degrees for angle drilling.
  • Perfect for drilling reinforced concrete, bricks and other building material for ventilation and plumbing channels, waste evacuation pipes, barriers and road signs.
  • 966563503 Husqvarna DM220 Hand Held Wet Core Drill

    $1,540.00
  • LED indicator shows when the machine is in vertical, horizontal or angled position.
  • The front handle can be turned 360 degrees.
  • A three-way valve enables both dry and wet drilling.
  • Free carrying case.
  • 967208601 Husqvarna DMS 340 LS Core Drill Rig

    $3,135.00
  • DMS 340 is an all-around drill stand and motor combination that can handle a variety of drilling applications
  • 1-1/4"- 7 threaded attachment, 14" capacity without spacer (16" with spacer)
  • 3508 Husqvarna DMS 280 Core Drill Rig

    $2,800.00 to $4,211.48
  • The stand can be tilted from 0 to 45 degrees for angle drilling.
  • Drill holes up to 10" (153mm) in diameter.
  • 24" drilling stroke.
  • Add to cart

    968411301 Husqvarna DM230 Hand Held Wet Core Drill

    $1,640.95
  • New handheld drill motor with functional ergonomics.
  • Free carrying case.
  • Water-cooled gearbox, extends life of gearbox and gaskets.
  • 966916101 Husqvarna DMS 180 Core Drill Rig

    $1,158.43
  • Drill holes up to 6" (153mm) in diameter.
  • 1,700 watts/15 amp motor with an 800 rpm single-speed gearbox.
  • For angle drilling.
  • 001003 Milwaukee 4090 15 Amp Motor

    $1,480.39
  • 115 Volt, 375-750 Rpm
  • Built-in water swivel
  • 1-1/4" - 7 spindle thread
  • Recommended bit diameters from 2-1/2" to 8"
  • 966827302 Husqvarna DS250 Core Drill Stand

    $920.01
  • Integrated vacuum base for fast and easy set-up without anchoring.
  • Drill holes up to 10" (254mm) in diameter.
  • Perfect for angle drilling.
  • 966554104 Husqvarna DM280 Low Speed Motor Drill

    $1,895.00
  • Spindle speed full load low speed 240 / 540 / 930 Rpm.
  • 20 Amps, 115 Volts, 1,750 / 1,850 Watts
  • 1-1/4" - 7 spindle thread.
  • Recommended bit diameter up to 14".
  • Weight 29 lbs (13 kg).
  • 8222 Husqvarna 12" Shaft Extensions

    $69.02 to $92.37
  • Shaft Extensions easily attach to the core bit and allow for a deeper drilling capacity.
  • Male 5/8"-11 to Female 5/8"-11, Length 12".
  • Male 1-1/4"-7 to Female 1-1/4"-7, Length 12".
  • Add to cart

    541400072 Milwaukee 4004 20 Amp Motor

    $1,513.69
  • 115 Volt, 300-600 Rpm
  • Built-in water swivel
  • 1-1/4"-7 spindle thread
  • Recommended bit diameters from 5" to 14"
  • 8221 Husqvarna Shaft Couplings

    $54.88 to $83.23
  • Shaft couplings permit positive thread-to-thread adaptation from machine to core bit.
  • Add to cart

    966827202 Husqvarna DS150 Core Drill Stand

    $728.91
  • Combo base with vacuum pad is standard no need for an additional vacuum base.
  • Drill holes up to 6" (153mm) in diameter.
  • Maximum height of 32" allows drill stand to operate in confined spaces.
  • 6805 Husqvarna DS 800 Core Drill W/ Combo Base & Vacuum Assembly

    $3,885.70 to $4,040.00
  • 1" to 14" bit capacity standard
  • 42" long, precision ground and plated 2-7/8" square column reduces flex for more accurate drilling.
  • Free shipping from Factory warehouse
  • Add to cart

    6810 Husqvarna DS 800 Core Drill W/ Anchor Base

    $3,398.85
  • 1" to 14" bit capacity standard
  • 42" long, precision ground and plated 2-7/8" square column reduces flex for more accurate drilling
  • Free shipping from factory warehouse
  • Add to cart

    966829803 Husqvarna DS450 Core Drill Stand with Vacuum Plate

    $1,426.88
  • Anchor base and vacuum plate combo.
  • Quick disconnect feature enables motor to be easily removed and attached to the stand.
  • Drill holes up to 16" (400mm) diameter with spacers.
  • 966829808 Husqvarna DS450 Core Drill Stand Anchor Base

    $1,185.00
  • Anchor base.
  • Quick disconnect feature enables motor to be easily removed and attached to the stand.
  • Drill holes up to 16" (400mm) diameter with spacers.
  • Perfect for angle drilling.
  • 8238 Husqvarna DS 800 Stand Less Motors

    $1,285.83 to $2,044.77
  • Drill holes up to 16" (extra spacer required).
  • 1" to 14" bit capacity standard. Spacers available for larger bit sizes.
  • 42" long, precision ground and plated 2-7/8" square column reduces flex 
  • Add to cart

    965157822 Husqvarna DS50 Gyro Telescope Core Drill Stand

    $6,008.00
  • Telescope stand system that works with most drills.
  • Includes stand and drill column, rubberized support plate carriage and base plate with wheels.
  • Drills up to 14" diameter, drill travel of 24" max.
  • 967227903 Husqvarna DM650 Motor Drill with PP65 Power Pack

    $9,539.53
  • 18-step adjustable rpm range ensures optimal speed for all drill bit dimensions.
  • Power: 3 phase 8 hp/4 kW, 1 phase 6 hp/3 kW.
  • 1-1/4" - 7 spindle thread.
  • Recommended bit diameter up to 24".
  • 965987204 Husqvarna DM340 Motor Drill, 115V

    $2,200.00
  • Spindle speed full load low speed 170 / 380 / 650 Rpm.
  • 20 Amps, 115 Volts, 3,400 Watts
  • 1-1/4" - 7 spindle thread.
  • Recommended bit diameter up to 16".
  • Weight 31 lbs (14 kg).
  • 090635 Husqvarna Water Collector Ring

    $300.38
  • Features an effective gasket and traps waste water when down-hole drilling.
  • Accepts bit sizes up to 8" diameter.
  • 965158207 DM 406 H 6-Speed Hydraulic Drill Motor

    $4,990.00
  • 120-1,400 Rpm.
  • 1-1/4" - 7 spindle thread.
  • Recommended bit diameter from 1" to 24".
  • Weight 35 lbs (16 kg).
  • 541400073 Milwaukee 4096 20 Amp Motor with Clutch

    $3,460.44
  • 115 Volt, 450-900 Rpm
  • 1-1/4"-7 spindle thread
  • Recommended bit diameter from 2" to 10"
  • Weighs 40 lbs.