1021 Products

View by:

1021 Products

9488 Novatek PPT 4" Air Scarifier

$1,679.99 to $2,979.99
(0)
  • Lightweight scarifier can be used vertically and overhead.
  • Imitates a shot blast finish converts in one minute to accept other surface preparation media.
  • Star cutters help tackle non-skid, PRC and coal tar removal jobs.



  • Add to cart

    9217 Husqvarna B735 Millenium Medium Bits Professional

    $68.00 to $1,124.99
    (0)
  • For medium to large jobs providing best performance and lowest cost per hole.
  • For drilling cured concrete with medium to soft aggregates with or without steel reinforcing.
  • 14" drilling depth
  • Add to cart

    506352005 Husqvarna Guide Roller

    $49.07
    (0)
  • Fits K960, K3600, K3600M II & 950 Saws.
  • Engagement Roller For Ring Saw, Sold as Each, purchase 2 for set.
  • 506178304 Husqvarna Drive Disk For Ring saws

    $25.00
    (0)
  • For ring saw blades,fits K960, K3600, K3600M II & 950 Saws.
  • Drive disk for ring saw.
  • 9325 Wacker Oil-injected Vibratory Rammers

    $2,608.20 to $3,642.25
    (0)
  • Amazing fuel to oil ratio of 120:1 allows for longer and cleaner running times up to 65 hours on a single tank of oil.
  • Oil-injection eliminates spark plug fouling.
  • Add to cart

    158936-24 MK-5013G 13 hp Honda Block Saw 24" Blade Guard

    $5,738.50
    (0)
  • 10" depth of cut.
  • 11.7 hp Honda 4 stroke gas motor.
  • Free shipping from MK factory warehouse to a commercial address.
  • 9576 Diteq TeqVac Filter Options

    $23.66 to $165.00
    (0)
  • Micro-Prefilter protects the primary & secondary filters, eliminating the need to clean them.
  • Captures airborne particles down to 0.3 microns for the ultimate in dust containment.
  • Add to cart

    542139568 Husqvarna Concrete Saw Handle grip

    $1.60
    (0)
  • Husqvarna concrete saw handle Grip.
  • 506378303 Husqvarna Clutch Wheel, K750/K960

    $45.04
    (0)
  • Fits k750 / k960 power cutters.
  • 506384602 506384602 Husqvarna Piston Complete 70cc EPA

    $96.89
    (0)
  • Piston for Partner/Husqvarna K650 Mk II, Super & Active.
  • 50mm Piston.
  • Genuine Husqvarna Part.
  • OEM No. 506 09 92 12.
  • 506352103 Husqvarna K960 Support Roller Cap

    $49.07
    (0)
  • 506352103 Husqvarna K960 Support Roller cap for Ring Saws.
  • Sold individuality.
  • 9954 Husqvarna Dri 5 Dry Diamond Core Bits

    $79.50 to $315.00
    (0)
  • For drilling brick & fast drilling of lightweight block or concrete block materials.
  • Not recommended for use on cured concrete.
  • Add to cart

    7922 MK Scarifier Drums Cutting Wheels and Parts

    $2.34 to $20.00
    (0)
  • Carbide 5 Point 84 cutters.
  • Carbide 6 Point 78 cutters.
  • Steel Sharp Tooth 18 Point 114 cutters.
  • Steel Blunt Tooth 12 Point 114 cutters.
  • Add to cart

    8221 Husqvarna Shaft Couplings

    $50.00 to $85.05
    (0)
  • Shaft couplings permit positive thread-to-thread adaptation from machine to core bit.
  • Add to cart

    8222 Husqvarna 12" Shaft Extensions

    $48.36 to $93.00
    (0)
  • Shaft Extensions easily attach to the core bit and allow for a deeper drilling capacity.
  • Male 5/8"-11 to Female 5/8"-11, Length 12".
  • Male 1-1/4"-7 to Female 1-1/4"-7, Length 12".
  • Add to cart

    6800 MK Manta III Tilt Base Core Drill Rig

    $2,391.25 to $2,751.89
    (0)
  • Bit Capacity: 1/2" to 12" (14" w/spacer).
  • Precision rack-&-pinion carriage with maintenance-free double-sealed bearings.
  • Vacuum pump included with combination base.
  • Add to cart

    8219 Multiquip FS Concrete Vibrator Shafts

    $129.95 to $291.32
    (0)
  • Fits CV2, CV3, G55H, BP25H Vibrator Motors.
  • For use with 1400HD, 1700HD, 2100HD, 2600HD steel heads, & RHV188, RHV250, RHV275, RHV275S rubber heads
  • Add to cart

    8201 MK Crown Diamond Wet Core Bits

    $55.00 to $329.57
    (0)
  • Premium grade for prestressed & precast concrete.
  • Thin Wall diamond core bits for faster drilling in reinforced concrete and masonry.
  • Ideal for Drilling Anchor Holes and Small Diameters.
  • Add to cart

    8295 Kor-It K-401 & K-416 Mobile Core Drill Machines

    $4,709.90 to $6,589.90
    (0)
  • Variable Rpm: 300 to 1100 bit Rpm.
  • Drill anywhere with gasoline motors (6.5 & 15 hp).
  • 6" to"16" diameter core bit capacity.
  • weight: 285 lbs. to 300 lbs.
  • Free shipping.
  • Add to cart

    8223 MK Diamond 5/8"-11 Shank Adapters

    $56.00 to $100.00
    (0)
  • Shank Adapters thread onto the core bit and provide easy attachment to most hand-drill chucks.
  • 5/8"-11 male thread.
  • Add to cart

    7984 Edco 36" Snap-On Trowel Blade

    $14.88 to $18.52
    (0)
  • Available in either Combination, Finish or Float style blades
  • Combination blades can be used either as a float blade or a finish blade
  • All 36" Snap-On Blades require the use of adapter "A"
  • Add to cart

    9214 Husqvarna Scarifier Accessories 1/2" Shaft

    $0.79 to $1,351.35
    (0)
  • Husqvarna Mini Planer/Scarifier Accessories.
  • Full range of steel & carbide flails/cutters.
  • Carbide, star, beam cutters & wire brush available.
  • Add to cart

    9151 Husqvarna Millenium B635 Medium Diamond Core Bit

    $62.00 to $673.00
    (0)
  • For medium to large jobs providing best performance and lowest cost per hole.
  • For drilling medium-hard to soft concrete with or without steel reinforcing.
  • 14" drilling depth.
  • Add to cart

    10011 Multiquip MVC64VH 13.8" x 21.3" Mikasa Forward Plate Compactor

    $1,709.48 to $1,794.31
    (0)
  • Perfect for small jobs or narrow areas.
  • Solid, high-strength steel base plate.
  • Features anti-vibration handle.
  • Powered by Honda 3-1/2 Hp GX-120 engine.
  • Optional water tank.
  • Add to cart