BJM SV400-115 2" Submersible Pump
Product Details
Product Details
BJM SV400-115 2" Vortex Trash Submersible Pump
The SV family of pumps from BJM offer long life and trouble free performance at a low investment cost. Motor Casing, impeller shaft and all hardware are made of 304 Stainless Steel, with impeller and other exposed parts made of cast-iron. Each pump is tested at the factory for performance as well as safety.
Features
- For non-clog, solids handling pump for sludge, sewage, trash & industrial waste
- Recessed vortex impeller pumps for passing large solids found in sewage and industrial waste
- SV pumps are designed to pass mud, raw sewage, leaves, rags, wood chips and other solids without clogging
- Constructed with a cast iron volute and fully recessed impeller for pumping solids without clogging
- Rugged construction (no breakable plastic component) and light weight for portability
- Lip Seal and double mechanical seals
- Lower seal is silicon carbide/silicon carbide and upper seal is carbon/ceramic
- Built in high temperature automatic overload switch and class F motor insulation protects against motor failure due to overheating
- 1/2 HP, 110V, single phase, 7.5 Full Load Amp
- Max Solids 1-1/2"
Technical Specifications
| BJM SV400-115 Specifications | |
| MAX. FLOW: GPM | 59 gpm |
| MAX. HEAD: ft | 22 ft |
| PUMP TYPE | Elect.Submersible, Non-Clog Vortex |
| DISCHARGE CONNECTION | 2" NPT-M (45° elbow) |
| SHIPPING WEIGHT:lbs | 40 lbs |
| MECHANICAL SEAL UPPER | Crb / Cer |
| MECHANICAL SEAL LOWER | Sic / Sic |
| MOTOR CASING | 304 SS |
| PUMP VOLUTE | Cast Iron |
| IMPELLER-MULTI VANE | Cast Iron |
| LIPSEAL & O-RINGS | Buna-N |
| ROTOR SHAFT | 304 SS |
| EXTERNAL HARDWARE | 304 SS |
| QTY. OIL IN SEAL CHAMBER | 1.35 U.S. fl. oz. |
| ELECTRICAL/MOTOR DATA | |
| MOTOR RATING: HP | 1/2 |
| MOTOR RPM | 3450 Rpm |
| MOTOR INSULATION CLASS | F |
| MOTOR SERVICE FACTOR | 1.1 |
| VOLTAGE | 110V, 1ph-60Hz |
| CURRENT Full Load Amps. | 7.5 Amps |
| MOTOR PROTECTION | Thermal breaker |
| POWER CORD GAGE & LENGTH | 16/3, 33 ft |
| MAXIMUM LIQUID TEMPERATURE | 104 F |
Ratings & Reviews
2 reviews
Love it
by Steve
out of all of the pumps out there I had the easiest time pumping out my basement that flooded during a storm, it was able to handle all of the water and even some of the micelanious things that were scattered throughout the basement
just what I needed
by Victor
after searching high and low for a pump that can handle water from a deep well in my backyard it was perfect with no issues