Norton Clipper 14" High Speed Cut-Off Saw, CP514-350i with Premium Diamond Blade

Designed with the user in mind to not only cut a smooth, fast track, but it’s also fully equipped to handle the everyday performance of any jobsite with unrelenting durability and reliability. world’s first patented automatic lubrication system, iLube®.

General Features

  • Kit package with Norton Max Cut 4x4 14 inch Blade
  • Patented iLube® automatically controls mixing of oil and fuel for maximum efficiency.
  • An electronic sensor will indicate a low oil level and adjust the engine to idle to prevent engine damage.
  • The electronic carburetor’s electromagnetic valve eliminates the standard choke and half throttle start.
  • The 3-step easy start eliminates the hassle of a choke.
  • Simply turn the switch on, prime the engine, and push the decompression button, then pull the cord to start.
  • Patented twin-air inlets create an air pulsation that draws fresh air in while pushing hot air away from the engine and releasing it out the back to keep the saw running cool and reduce debris being trapped in the filter.
  • The external rocker wheel vibrates the filter to further help release debris.
  • Extending filter life for less cleaning/replacement.
  • Made in Germany.
  • 3 stage heavy duty air filter.
  • Easy Start System. NO chokes to set, four simple steps to start.
  • Prime it; Push the decompression valve (this step can be skipped); Turn the ignition switch; Pull the starter rope.
  • Higher hp 5.4 vs. 5 hp for K760.
  • Higher performance air filtration system with filter shaker for longer life.
  • Better balance the blade will not hit the ground when you pick the saw up,
  • whereas the Husqvarna blade will hit the ground.
  • Better ergonomics allows cutting in any position, not so with the K760.
  • Full double rolled bearings all bearings (Clutch drum, crank shaft, and blade shaft) not so with the K760.
  • Patented ILube system (Intelligent lubrication system) 350i model exclude the need to pre-mix gas & oil.
What's Included?
  • Norton Clipper CP514-350i Cut-Off Saw
  • Norton 4x4 Max Cut 14" High Speed Diamond Blade
  • 14 in Abrasive Masonry Disc
  • Hand Tools
  • Spare Parts
  • Operator's manual
Norton Clipper CP514-350i Cut-Off Saw Specifications
Blade Size14 inch
Power (Gas)5.4 hp / 4 kW
Blade Shaft RPM4,500
Arbor3/4 inch (20 mm)
Max Depth of Cut5 inch
Fuel Capacity0.23 gals (0.9 L)
Oil Capacity10.08 oz. (0.32 L)
Weight23.15 lbs

Ratings & Reviews

Be the first to write a review