Details

Chicago Pneumatic CP 0009 Combi Drill Hammer

The CP 0009 rotary hammers are designed for a wide variety of constructions and maintenance applications such as driving or setting masonry anchors and drilling holes in concrete, bricks or rock. As a hammer, these tools can be used for chipping, scarifying, scaling and cleaning welds. The CP 0009 is used for drilling holes from 8 to 25 mm in diameter, and up to 300 mm in depth. However, above 25 mm in diameter, we recommend first performing a test to prevent excessive wear.

Features:
  • A and F versions feature a rotation release button, converting the machine from a drill to a hammer
  • Excellent power-to-weight ratio helps drill holes faster and easier than comparable electric rotary hammers
  • Built-in oiler provides continuous lubrication
  • Teasing throttle for precise control
  • Cushioned piston for smooth operation, long life
  • Right hand rotation
  • Equipped with an SDS adapter, CP 0009 A, can be used with electric hammer drill bits
  • Choice of chuck:
    • Round Shank, 3/4" x 3-3/4"
    • Spline Drive
Chicago Pneumatic CP 0009 Combi Drill/Hammer Specifications
ModelOverall Length

(in.)
Air Inlet (in.)Impact Rate

(bpm)
Max Drill Depth

(in.)
Type of ChuckChuck Size

(in.)
Weight (lbs.)Part no.
CP 0009 A14-3/43/8 NPT3,42017.5Round Shank3/4 x 3-3/48.82T 022083
CP 0009 F14-3/43/8 NPT3,42017.5Spline DriveN/A8.82T 022511


Ratings & Reviews

Be the first to write a review