CC055080 CS Unitec 20" Premiun AirForce F4 Diamond Chain
- Product code: CC055080
- Manufacturer: CS Unitec
- MPN: CC 05-5080
CS Unitec 20" Premiun AirForce F4 Diamond Chain, CC 05-5080
AirFORCE F4™ Diamond chain optimized for pneumatic and hydraulic chainsawing.
- For cutting concrete with steel reinforcement.
- 20" chain has 34 segments for 20" max. cutting depth, 19" square corners.
- Use minimum of 20 PSI water pressure.
- Always cut at full throttle slowly plunge into wall and push hard enough to cause the RPMs to drop by 25% to 30%.
- Always apply steady feed force.
- Slowly rock the bar and chain into the cut using Wallwalker® as a pry point.
- Reduce arm motions hold saw close to body, using legs and body to apply feed force; always cut with saw between shoulders and knees, preferably at waist height.
- If saw begins to drift off the intended cut line, pull out and restart cut.