CC022540 CS Unitec 10" Standard AirForce F4 Diamond Chain
- Product code: CC022540
- Manufacturer: CS Unitec
- MPN: CC 02-2540
CS Unitec 10" Standard AirForce F4 Diamond Chain, CC 02-2540
AirFORCE F4™ Diamond chain optimized for pneumatic and hydraulic chainsawing.
- General-purpose Diamond Chain.
- 10" chain has 25 segments for 10" max. cutting depth, 9" square corners.
- Use minimum of 20 PSI water pressure.
- Always cut at full throttle slowly plunge into wall and push hard enough to cause the RPMs to drop by 25% to 30%.
- Always apply steady feed force.
- Slowly rock the bar and chain into the cut using Wallwalker® as a pry point.
- Reduce arm motions hold saw close to body, using legs and body to apply feed force; always cut with saw between shoulders and knees, preferably at waist height.
- If saw begins to drift off the intended cut line, pull out and restart cut.