CC013810 CS Unitec 15" Premium AirForce F4 Diamond Chain
- Product code: CC013810
- Manufacturer: CS Unitec
- MPN: CC 01-3810
CS Unitec 15" Premium AirForce F4 Diamond Chain, CC 01-3810
AirFORCE F4™ Diamond chain optimized for pneumatic and hydraulic chainsawing.
- For cutting concrete with steel reinforcement.
- 15" chain has 29 segments for 15" max. cutting depth, 14" square corners.
- Use minimum of 20 PSI water pressure.
- Always cut at full throttle slowly plunge into wall and push hard enough to cause the RPMs to drop by 25% to 30%.
- Always apply steady feed force.
- Slowly rock the bar and chain into the cut using Wallwalker® as a pry point.
- Reduce arm motions hold saw close to body, using legs and body to apply feed force; always cut with saw between shoulders and knees, preferably at waist height.
- If saw begins to drift off the intended cut line, pull out and restart cut.