BitBuddie™ 1" to 4" Dustless Bit Shroud
Dust Control System for Drills and Percussion Hammers
- 18" vacuum hose included.
- Simply cut plastic shroud to desired diameter following pre-marked circles.
- Captures dust and slurry
- Suction holds it in place
- Great for tight spaces
- Excellent for drilling faucet holes in stone countertops.
- Use with core drills or percussion hammers.
- 1-4" BitBuddie Model # D1905.
- The BitBuddie dust and slurry control system is for use with drills, hammer drills and core drills.
- Fast and easy to use, the BitBuddie dust and slurry control system is held in place by vacuum pressure.
- No clamps or braces are required. Simply turn on the Wet/Dry vacuum and put the BitBuddie where you want it, and you're ready to drill.
- The 1 to 4 inch BitBuddie is for use with larger core drills and does an excellent job of capturing dust and slurry to keep the job place clean and protect workers from dangerous airborne dust like silicon and Hexavalent Chromium.
- It allows you to drill close to a wall or other obstacle and capture the dust or slurry as it's made.
- The BitBuddie is designed to be used with the Dustless Technologies Wet/Dry Vacuum.
- A system that is specifically designed handle the dust and slurry created in construction sites.