after searching high and low for a pump that can handle water from a deep well in my backyard it was perfect with no issues
Non-Clog, Solids Handling Electric Submersible Pump for Sludge, Sewage, Trash & Industrial Waste
The SV family of pumps from BJM offer long life and trouble free performance at a low investment cost. Motor Casing, impeller shaft and all hardware are made of 304 Stainless Steel, with impeller and other exposed parts made of cast-iron. Each pump is tested at the factory for performance as well as safety.
- Recessed vortex impeller pumps for passing large solids found in sewage and industrial waste.
- SV pumps are designed to pass mud, raw sewage, leaves, rags, wood chips and other solids without clogging.
- Constructed with a cast iron volute and fully recessed impeller for pumping solids without clogging.
- Rugged construction (no breakable plastic component) and light weight for portability.
- Lip Seal and double mechanical seals.
- Lower seal is silicon carbide/silicon carbide and upper seal is carbon/ceramic.
- Built in high temperature automatic overload switch and class F motor insulation protects against motor failure due to overheating.
- 1/2 HP, 110V, single phase, 7.5 Full Load Amp
- Max Solids 1-1/2"
|MAX. FLOW: GPM|
|MAX. HEAD: ft|
|MECHANICAL SEAL UPPER|
|MECHANICAL SEAL LOWER|
|IMPELLER- MULTI VANE|
|LIPSEAL & O-RINGS|
|QTY. OIL IN SEAL CHAMBER|
|MOTOR RATING: HP|
|MOTOR INSULATION CLASS|
|MOTOR SERVICE FACTOR|
|CURRENT Full Load Amps.|
|POWER CORD GAGE & LENGTH|
|MAXIMUM LIQUID TEMPERATURE|
Ratings & Reviews
Most Helpful Reviews
out of all of the pumps out there I had the easiest time pumping out my basement that flooded during a storm, it was able to handle all of the water and even some of the micelanious things that were scattered throughout the basement