Aqua Mix Sealers Choice Gold Penetrating Sealer
Product Details
Aqua Mix Sealers Choice Gold Penetrating Tile SealerFeatures
Tile and Stone Sealer Application
|
11 questions
I used this on 2" bathroom ceramic floor tile and grout last Fall. The tile and grout look good but my husband wants to reseal it. Can I just go over it with this again or do I have to take previous sealer off first?
by Mary 2/14/2017 3:20:40 pm
You need to ensure the surface is clean and dry for at least 24 hours prior to applying an additional coat of sealer. There are no additional steps.
What works best for saltillo don't want it shiny?
by Annie 2/22/2017 5:54:09 pm
This product is supposed to dry with a "no sheen" look. It is recommended to test on a small, discreet area first prior to applying to the entire floor.
I applied Enrich N Seal on outdoor slate about 9 months ago, looked good! Would like to refresh, can I just reapply after cleaning with soapy water & let dry? Or would another product line be better to use?
Thank you.
by Scooter 3/18/2018 10:12:09 pm
Since you had great results with this product we would recommend to continue using it. Just allow the stone to dry prior to using this product.
I just installed granite tiles over my balcony should I seal with this first or do grouting first then seal with this? Also Does this help prevent leaks under balcony?
by Manny 11/29/2018 11:50:29 am
You can seal either before or after grouting or both which ever you prefer. You will just need to adhere to the manufacturer guidelines when applying this the sealer. This sealer is more for stain resistance rather than waterproofing but will aid in the water not saturating the tiles and will bead up when hitting the surface.
I applied 2 coats of gold sealer. This was done months ago. I would prefer a low sheen look however. Can I apply the low sheen aqua mix directly over the gold sealer ?
by Patrick Evanishen 5/20/2019 1:38:40 pm
Aquamix does not recommend applying the Low Sheen Aqua Mix sealer on top of the Gold Sealer. The best way to get a low sheen look after applying the sealer would be to have it polished.