Details

Alpha AWS-125 5" Wet Stone Cutter

Important information regarding Alpha warranty returns

In the event that your Alpha power tool(s) are defective, and/or inoperable, they must be returned to Alpha Tool for inspection.This is the standard policy for all new (out of the box) and used Alpha power tools. Your item(s), will be inspected by Alpha, and a determination will be made on how to proceed with the warranty process.

  • Great for Seam Polishing and Removing Scratches!
  • Powerful Wet Stone Cutter for Fabricators

    • 5" wet stone cutter can easily cut through 1-5/8" material.
    • Accept a curve cutting blade. Curve cutting operations are safer and easier with the AWS-125.
    • Built-in water feed system that eliminates the harmful dust particles which are common in dry cutting applications.
    • Side handle for more stability and control.
    • 12,000 Rpm. 10 Amp, Weight 7.2 lbs Arbor 7/8" (22 mm)
    • Includes storage case included, water feed, and ground fault interrupter.
    • Suitable for use in the shop or on the job site, the AWS-125 is ideal for any professional stone fabricator/installer or tile contractor.
    • The AWS-125 Wet Stone Cutter is designed for use in the stone, tile and glass industry.
    • This machine is able to provide perfect straight cuts which is required for quality fabrication and installation.
    • Equipped with one of the most powerful motors in its class, the AWS-125 has the strength to power through tough materials, including porcelain and engineered stones.
    • Another safety feature included is a built-in GFCI (ground fault circuit interrupter).
    • Side handle for more stability and control.
    What's Included?
    • 5 in Wet Stone Cutter
    • Ground Fault Circuit Interrupter
    • Water Valve and Hose
    • Faucet/Garden Hose Adapter
    • Wrench
    • Straight Cutting Guide (reversible)
    • Extra Carbon Brush Set
    • Self-Stick Felt Strips
    • Side Handle
    • Operator's manual
    Alpha AWS-125 5" Wet Stone Cutter Specifications
    Power11.2 Amps
    Voltage120V
    RPM12,000
    Arbor Size7/8 in
    Weight7.2 lbs
    Blade Capacity5 in
    Depth of Cut1-5/8 in



    Question & Answers

    Can I use a carbide blade on the AWS-125?

    Any blade can be used as long as it is the right size and RPMs are compatible with the specs.��12,000RPM -- 7/8'' arbor -- 5'' diameter

    Ratings & Reviews

    2.5
    5 stars
    0% 0 reviews
    4 stars
    0% 0 reviews
    1 star
    0% 0 reviews
    Based on 2 Reviews

    Most Helpful Reviews

    |

    Alpha 125

    by - verified purchaser
    saw seems to be fairly powerful and cuts well however, bearings are not very tight the blade has about a 1/32 ' of play I also found that the base plate is not very well attachted to the motor one flimsy rivet. when the base is in the upright positionthere is excessive side play between base plate and motor also felt that the guide bar was poorly designed and poorly constructed extension arms are out of square and to flimsy allowing flex of the guide also difficult to align properly in parallel with the blade

    Was this review helpful?

    |

    frustated

    by - verified purchaser
    I bought this saw to cut Granite slabs for counter tops. went to use it today and it didn't work! the motor wouldn't start! I had to take it a part and found a wire that was not hooked up. I hooked up the wire and then it worked fine. but I spent 1 1/2 hours wasted to get it to work in the first place. If I would have had to send it back I would not have have the same product. Now that it is working it cuts well.

    Was this review helpful?