Laticrete 9235 Waterproofing Membrane Full Unit 6 Gal Kit 9235 Waterproofing Membrane is a thin, load-bearing waterproofing designed specifically for the special requirements of ceramic tile, stone, and brick installations. A self-curing liquid rubber polymer and a reinforcing fabric is quickly applied to form a flexible, seamless waterproofing membrane that bonds to various substrates.
Features- Full Unit Kit includes: 1 x 6 gal (23 l) pail liquid, 1 x 300 ft2 (28 m2) roll fabric 38" (965 mm wide), 1 x 75 ft (23 m) long roll fabric 6" (150 mm wide)
- Approximate coverage for the full kit is 300 sq ft
- LATICRETE 9235 Waterproofing Membrane is The Industry Standard for wet areas and continuous water submersion applications
- Applies with a paint roller or brush, cures in just hours, and provides a permanent waterproofing base for tile, glass mosaic, and stone in pools, showers, and spas
- Accepted by IAPMO and ICC for shower pans, meets ANSI A118.10 and ANSI A118.12, is non-hazardous and meets all V.O.C. requirements
- When anti-fracture treatment is required in wet areas, LATICRETE 9235 Waterproofing Membrane provides the complete package
- You only need one product to protect your floor from water damage and substrate cracks
- Equipped with Microban antimicrobial technology
- Microban provides around-the-clock product protection from the growth of microbes, including bacteria, mold, and mildew
- Integrated antimicrobial technology stays present and active for the expected lifetime of a product at a cellular level to continually disrupt the growth and reproduction of contaminating microorganisms
Advantages- Inhibits stain-causing mold and mildew growth in the substrate with Microban antimicrobial product protection
- Safe-no solvents and non-flammable
- Interior and exterior use
- Vertical and horizontal surfaces (including ceilings)
- Thin-only 0.02" (0.5 mm) thick when cured
- Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
- "Extra Heavy Service" rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
- IAPMO and ICC Approval
- Applies quickly with a paintbrush or roller-no special mixing or application equipment needed
- Fast cure-normally ready in hours for finishes
- Install tile, brick and stone directly onto membrane
- Certified by The GREENGUARD Institute
- Easy cleanup-just use water while fresh
- Protects concrete and reinforcing steel from corrosion
Uses- Swimming pools, fountains and water features
- Shower pans, stalls and tub surrounds
- Bathrooms and laundries (industrial, commercial and residential)
- Spas, hot tubs
- Kitchens and Food Processing Areas
- Terraces and balconies over unoccupied spaces
- Countertops
- Facades
- Steam rooms (when used in conjunction with a vapor barrier)
Suitable Substrates- Concrete
- Cement Mortar Beds
- Cement Plaster
- Concrete and Brick Masonry
- Exterior Glue Plywood*
- Gypsum Wallboard*
- Ceramic Tile and Stone**
- Cement Terrazzo**
- Cement Backer Board***
- * Interior Applications Only
- ** If skim coated with a LATICRETE Latex Thin-Set Mortar
- *** Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use
 |
