Rubi Cyclone Tile Leveling System 1/16" Flat Bases
Product Details
Product Details
Rubi Cyclone Tile Leveling System 1/16" (1,5MM) Flat Bases
Rubi's new leveling system is designed to avoid lippage during the laying of ceramic tile in both floor and wall tiles.
Features
- Available in 100, 300 and 2400 quantities
- Recommended for tiles 12" x 12" and larger
- Especially recommended to improve finishes when working with large-format tiles
- Easy, fast and intuitive to use as no prior user experience is necessary
- No tools required - simply spin the screw cap into place and hand tighten
- Spacer bases fit below tiles and then the cap is screwed on
- Guaranteed flatness and regularity of the laying surface
- Side grooves at the strap´s base facilitates the transfer of the adhesive, improving the coverage on the ceramic tile
- Built in spacers
- Each clip thickness is easily identified thanks to the range of different colors available (1/16" is a white clip)
- Compatible with other threaded leveling system caps
- Recommended for tiles thickness from 3 - 18 mm (1/8" - <3/4")
- Simple impact removal system (by kicking or mallet) - Always in the direction of the grout joint
- Cyclone Caps sold separately
Technical Data
- Use on most tile and stone from 3 - 18 mm (1/8" - <3/4") thick
- Minimum joint size: 1/16" (1,5mm)
- 100, 300, or 2400 bases per bag
How to use
- STEP 1: Place spacer bases under tile once thinset has been applied
- STEP 2: Apply Cap. The cap will align with the top of the base allowing for easy threading
- STEP 3: Spin cap onto base and once the cap makes contact with the tile, turn the cap until the adjacent tiles are level, no need to over-tighten
- STEP 4: After thinset has cured break off caps and bases. It’s important to break the cyclone caps by kicking them or hitting with a rubber mallet, in the direction of the grout joint
- STEP 5: Remove the broken bases from caps by unscrewing them (caps are reusable and will last multiple jobs with proper installation and removal)
Ratings & Reviews
4 reviews
12/13/2022 6:56 pm
Rubi vs. RTC
by Patrick Doherty -
No where near as good as RTC Spin Doctor stems. Will work with RTC spin doctor caps however they are inferior. Spend the extra money on RTC stems, better quality for the professional.
2/16/2023 1:28 pm
Great
by G & A ceramic inc
Great service, great produce, great prices
6/14/2023 7:26 pm
Best spacers out there
by Ed
Not sure why the review, saying that this are not good?
Yeah, this spacers are the best, compared to all brands, very strong built compared to the RTC ones, that you barely touch them and they brake! Also with the Rubi one you got 2400 instead of 2000 RTC offers!
11/30/2023 1:30 pm
Awesome
by G A Ceramic Inc
Great product